Wood Protector
Wood Protector
Wood Protector
With SUNS Wood products, clean every type of untreated wood easily and comprehensively.
With SUNS Wood products, clean every type of untreated wood easily and comprehensively.
- Environmentally friendly
- Water and oil repellent
Wood Protector
The SUNS Wood Protector with nanotechnology is a transparent solvent for protecting all unpainted and un oiled soft and hard woods, both indoors and outdoors. The SUNS Wood Protector with durable nano protection creates an invisible, well-adhesive, UV-filtering and vapor-permeable layer that protects the wood against water, oil, mosses, algae and fungi and thus preserves the natural appearance of the wood. For teak, pre-treat with SUNS Wood Cleaner to obtain good impregnation.
Instructions
Shake well before use! Only apply outdoors or in a well-ventilated area. Make the surface dry, clean and free of grease. Use the SUNS Wood Cleaner for quick and effective cleaning of wood. Do not use below 5 °C.
Apply the product undiluted and spread evenly with a soft brush or brush. Product may foam slightly. Application is also possible with a non-misting applicator gun (0.8 mm), do not vaporize. Avoid drops and wipe immediately. Apply 2x for optimum protection.
Allow the first layer to dry for approximately 1 hour before applying a new layer. Dries within a few hours, depending on temperature and substrate. The product has fully reacted in approximately 24 hours. Do not load the surface with water or oil during this time.
Safety
Causes serious eye irritation. Wear protective gloves, eye and face protection. Keep out of reach of children.
Product Combinations | Content: 1 L |
---|
With SUNS Wood products, clean every type of untreated wood easily and comprehensively.
By treating your wooden furniture, deck, porch or fence with the Protector, you add an ultra-thin protective layer, which offers long-lasting protection from the effects of water, oil, moss, algae and fungi.